Product assembly
Product use
4.2 Handset Assembly
5.1 When Double Roulette is used
4.4 Correctly install the cleaning cloth
4.3 Disassembly and assembly of battery pack
Five, product use
6
7
BOBOT ROBOTICS INC.
BOBOT ROBOTICS INC.
Figure 4-3
In the wheel combination mode, the vacuum cleaner and the double wheels can be turned on and run independently or together.
The machine leaves the ground for 3 seconds
The mop should be as consistent as possible with the center of the base rotating turntable.
Figure 4-4
Double roulette stopped working
stop working.
Tilt the fuselage to a suitable angle, press the MOP button to start the double wheel work, automatically spray water to pre-wet the mop, press again
The MOP button stops the work of the double roulette; press the trigger on the handle, the water spray indicator of the clean water box will light up, and water will be sprayed to the middle of the mop.
There are three cleaning modes as follows: hand-held vacuum cleaner separate mode, divided into two levels according to the size of suction; vacuum cleaner + dual
Put the battery pack into the downward battery slot as shown in Figure 4-5, press it down slightly, and hear a "click" sound, indicating that the installation is successful.
Press and hold the battery pack lock button, and pull the battery pack upwards as shown in Figure 4-6.
After assembling the handle on the machine, press the operation button on the handle to enter the corresponding cleaning mode, and press again
Figure 4-5
Insert the handset assembly into the corresponding position of the fuselage according to the direction shown in Figure 4-3.
Prompt before starting the machine: please check that the mop and the hand-held washer are installed, and the clean water box is filled with clean water.
Figure 4-6
After hearing a "click", the assembly is completed as shown in Figure 4-4.
Machine Translated by Google
