background image

Name  and  Content  of  Hazardous  Substances  in  Products  BOBOT  ROBOTICS  INC.

Simple  faults  and  solutions

8.  Simple  faults  and  solutions

fault  phenomenon

12

13

possible  reason

9.  Name  and  content  of  harmful  substances  in  the  product

10  

Hazardous  Substances

polybrominated  biphenyls

Hexavalent  chromium

BOBOT  ROBOTICS  INC.

Charge

injection  model

or  low  suction

Empty  the  trash  in  the  dust  cup

Disposal  Recycling  Tips:

Lead  (Pb)  Mercury  (Hg)  Cadmium  (Cd)

low  battery

Refer  to  the  instruction  manual  "Battery  charging"  correctly

filter

shorten

Filter*

The  dust  cup  or  separation  filter  is  not  correct

influences.

motor

The  dust  cup  or  separation  filter  is  not  correct

This  form  is  prepared  in  accordance  with  the  provisions  of  SJ/T11364

quantity  requirements.  However,  due  to  the  limitation  of  current  scientific  and  technological  development,  it  is  temporarily  impossible  to  achieve  replacement  or  reduction.

In  order  to  better  care  for  and  protect  the  earth,  when  the  user  no  longer  needs  this  product  or  the  product  life  ends,  please  comply  with

Part  Name

Empty  the  trash  in  the  dust  cup

Power  Adapter

Reinstalled  dust  cup  correctly  or  detached

Charge

The  extension  tube  or  the  floor  brush  is  blocked  by  a  foreign  object

Replace  after  purchasing  original  battery  pack

Warning:  If  you  find  that  the  machine  is  working  abnormally,  please  turn  off  the  machine  and  unplug  the  power  plug  to  cut  off  the  power!

(Pb)

HEPA*

install  correctly

Warning:  If  the  above  tips  still  cannot  solve  the  machine  problem,  please  contact  our  after-sales  service  or  technical  personnel

National  laws  and  regulations  on  the  recycling  and  disposal  of  waste  electronic  products,  and  hand  them  over  to  the  local  nationally  recognized  recycling

Polybrominated  diphenyl  ethers

The  dust  cup  is  full

Refer  to  the  instruction  manual  "Removal  of  foreign  body  blockage"  

for  treatment

filter

There  is  obvious  in  the  vacuum  cleaner

appendix*

:  Indicates  that  the  content  of  this  hazardous  substance  in  all  homogeneous  materials  of  the  part  is  under  the  limit  requirement  specified  in  GB/T26572.

Contact,  do  not  disassemble  and  repair  by  yourself!

circuit  board  assembly

install  correctly

Insufficient  charging  time

(Pb)

switch*

Dust  leaks

Refer  to  the  instruction  manual  "Battery  charging"  correctly

The  vacuum  cleaner  has  no  suction

Machine  won't  start

The  dust  cup  is  full

battery  aging

(Pb)

battery  pack

:  Indicates  that  the  content  of  the  hazardous  substance  in  at  least  one  homogeneous  material  of  the  part  exceeds  the  limit  specified  in  GB-T26572

Internal  lead

Reinstalled  dust  cup  correctly  or  detached

Use  time  after  charging

Qualified  manufacturers  for  recycling,  if  improper  use  or  disposal  may  cause  harm  to  the  environment  and  human  health

Approach

Machine Translated by Google

Summary of Contents for SOP 610









Reviews: