In the U.S.A.: BOBRICK WASHROOM EQUIPMENT, INC.
Los Angeles:
6901 Tujunga Ave., North Hollywood, CA 91605-6213: Tel: (818) 982-9600, FAX: (818) 503-9287
New York:
200 Commerce Drive, Clifton Park, NY 12065-1350; Tel: (518) 877-7444, FAX: (518) 877-5029,
or e-mail: customerservice@bobrick.com
In Canada: BOBRICK WASHROOM EQUIPMENT COMPANY
45 Rolark Drive, Scarborough, Ontario M1R 3B1 •
Eastern Canada:
Tel: (877) 423-6555 • FAX: (877) 423-8555
•
Western Canada:
Tel: (877) 423-6444 • FAX: (877) 423-8444 or e-mail: customerservice@bobrick.com
© 2020 by Bobrick Washroom Equipment, Inc.
Form No. 824-307 r9/18/20 Printed in U.S.A.
1-1/4"
32mm
1-1/2"
38mm
1/4"
6mm
Activation
Area
X
Y
Side View
Required Clearance from bottom of counter
18" (457mm)
5"
(127mm)
Diameter
Clearance
Counter
Thickness
2"
(50mm)
Maximum
MOUNTING TEMPLATE
SureFlo
®
Automatic Counter-Mounted Soap Dispenser
Bobrick Models B-824, B-850, B-852, B-855, B-856, B-858 Liquid
B-828, B-840, B-842, B-845, B-846, B-848 Foam
Required Clearances:
Mounting Hole: 1-3/8" (35mm) diameter
Maximum Counter Thickness: 2" (50mm)
Below Counter:
18" (457mm) vertical clearance
5" (127mm) diameter directly below mounting hole for
bottle and bottom housing.
2-1/4" (57mm) diameter needed for mounting nut
directly below mounting hole. If sink rim below the
counter is within the clearance area, use a spacer
to ensure mounting nut is firmly tightened against,
bottom of the counter.
CAUTION:
Rim must not come into contact with activation area.
Instructions:
1. Using template, locate mounting hole position (on
left or right side). Ensure sink and plumbing fixtures
DO NOT
interfere with dispenser above or below the
counter (refer to clearances).
2. Drill 1-3/8" (35mm) diameter hole.
X = 1-1/2" (38mm) Maximum
Y = 1" (25mm) Maximum
X = 2-1/2" (63mm) Maximum
Y = 1/2" (12mm) Maximum
Option
A
Option
B
Sinks with Rim Over the Counter Area:
Unit is not compatible with a sink rim greater than the
maximum dimensions listed below:
