Quick Start
Cleaning
Schedule
Setting the Cleaning Schedule
Setting the Cleaning Schedule
Bob can be programmed to clean at the same time on multiple days of the week through his
FullCommand™ remote. After setting the current time and day on Bob’s remote, you may set his
cleaning schedule. Make sure Bob is turned ON and synced to his remote before proceeding.
The remote works on a 24-hour clock, so adjust accordingly.
The remote keeps its cleaning
schedule for 4 hours after the
batteries are removed.
1.
Press the SET CLEANING SCHEDULE
button on the remote. The first hour digit
will start flashing.
2.
Use the the LEFT and RGHT buttons to move
between minutes, hours, and days of the week.
Use the FWD and BACK buttons to adjust your
selection.
3.
Press the OK/SYNC button to select or
deselect days of the week. The days of
the week that are selected will be lit.
4.
Pess the SET CLEANING SCHEDULE
button again to save your settings.
Bob will chirp to confirm your save.
To clear Bob’s schedule, press
the SET CLEANING SCHEDULE
button and go through each day
of the week, pressing OK/SYNC
to deselect. The days of the week
that are selected will be lit.
Quick Tip:
Important to Note:
Parts You’ll Need:
FullCommand™
AAA Batteries x2
Remote
(not included)
46
45
