Quick Start
Charging
Charging Bob
Charging Bob on the
Charging Station
To charge Bob, place him on
his charging station with the
metal plates on his underside
sitting on top of the nodes on
his station. Make sure the
station is plugged in.
Bob will chirp once and slowly blink his cover
button to let you know that he is charging.
When Bob has fully charged, his cover button will
stop blinking and remain solid.
Sending Bob to
Charge
To send Bob to his charging
station, double click his cover
button or press the button
on his remote.
Charging Bob
Bob will automatically return to his charging station when low on battery. You can send Bob to charge
at any time by double clicking his cover button or pressing the button on his remote.
Conserving Bob’s
Battery
Bob should not sit on his
charging station for more than
5 days. If you will not be using
him at least once every 5 days,
turn him off and remove him
from the station to conserve
his battery.
To turn Bob off, push in the bumper while pressing the cover button for about 4 seconds.
Release the button when you hear Bob chirp. Bob’s cover light will then turn off.
20
