If the flooring is not dark or patterned, flip bObi over and wipe her sensors with
a clean, dry cloth until they are completely clean. If the issue persists, run bObi’s
checkup test.
If bObi’s sensors happen to be actually faulty, you can replace them with new ones
at home using a Philips head screwdriver. Go to bObi’s owners’ corner at
owners.
bobsweep.com
for a video guide and step-by-step instructions.
Error Code 2 (Er 02) - Main brush system
One or both of bObi’s main brushes are having difficulty rotating.
What to do:
Remove both main brushes and clean them thoroughly from end to end. If you see
congestion in the main brush motor area, try to clean it using a sharp-ended tool
like a pair of tweezers. If the congestion is not easily removable, bObi’s main brush
motor may need to be replaced. For a video guide and step-by-step instructions,
refer to bObi’s owners’ corner at
owners.bobsweep.com
.
On thick rugs or shag carpet, take out the rubber main and let bObi sweep with her
soft-bristled, blue main brush only. If the problem persists on hard flooring with a
clean main brush and no congestion in the brush motor area, it is likely that bObi has
an internal problem that bObsweep support will be able to resolve.
Summary of Contents for bObi Pet 2015
