Test the battery
While in test mode 0001, press LEFT on the remote. The number will change to
0002. In this mode, the main 4-digit number on the screen indicates the voltage of
bObi’s battery in millivolts (mv). Under normal circumstances this number ranges
between 1400 and 1600. If the number on the screen changes to 0000, it means
bObi’s battery is not working or has a loose connection. Open the battery compart-
ment and check the battery.
Test bObi’s wall detecting sensors
After testing the floor detection sensors, press RIGHT on the remote. The number
0100 will appear on the test mode indicator. Use a piece of paper, a roll of paper
towels, or a flat white surface to imitate a wall in front of bObi. Drag it from the left
side of the bumper around to the right side until you reach the power switch. Num-
bers 1-5 on the remote will become underlined one by one as you do this. Ignore the
numbers on the large 4-digit number in the middle of the screen.
Summary of Contents for bObi Pet 2015
