Putting bObi in Checkup Mode
Putting bObi in Checkup Mode
1.
Flip bObi’s power switch OFF.
2.
While holding down the OK button on bObi’s remote,
flip bObi’s power switch ON, then simultaneously
press WAFFLE and JUICE on bObi’s cover.
Current and scheduled times disappear
from the remote’s screen and new
indicators appear as the test progresses:
Numbers
1 to 7
display
status of various
sensors
.
The four-digit number in the center
–
Value Indicator
– displays various
measures of bObi’s parts.
The
Checkup Indicator
displays the
step
of the test
bObi is in – starting at 0000.
bObi will chirp 3 times to let you know she is now in checkup mode. You may release the OK
button. Do not press any additional buttons on bObi or her remote.
When In Checkup Mode:
During the test, GO!, JUICE, and
WAFFLE all remain lit on bObi’s
cover, and charging indicators cycle
sequentially.
Value
Indicator
Checkup
Indicator
Use the RGHT button on bObi’s remote to
cycle through each step of the Checkup
Test. Use the LEFT button to alternate
between subsections of each step.
!
Quick Tip:
87
