42
Edge Sensors
The edge sensors are blocked or dirty. Junior’s four, oval-shaped edge sensors
are located on his underside, near his bumper.
What to do:
•
Clean the sensors using a clean, dry cloth or compressed air.
If Junior is continually having trouble with his edge sensors while working on dark-
colored carpeting, you may need to deactivate them.
To deactivate Junior’s edge sensors (
see page 35
):
•
Hold down the CHECKUP button on Junior’s cover. The 4 bars
above CHECKUP will then flash on Junior’s screen.
•
After the bars flash 7 times and remain still, release the
CHECKUP button.
Caution: When you deactivate the edge sensors,
Junior will not detect stairs or sharp drops.
Touch Sensors
There is a small piece of debris trapped underneath Junior’s bumper that is
interfering with his touch sensors.
What to do:
•
Slowly and carefully tap on Junior’s bumper to force the obstacle out.
•
Use compressed air to clear out dust and debris trapped underneath the
bumper.
•
Press the corner ends of the bumper until you hear a tiny “click” sound.
If the bumper is not clicking on its ends, the touch sensors may need to
be replaced.
Oops! I feel there’s something funny going on with my:
Summary of Contents for Junior WJ540011
