Filters
Mesh Filter (Filter Frame)
For larger particles
High Efficiency Filter
For fine particles
Electrostatic Filter
For smaller particles
Filters
To maximize Bob’s efficiency, it is best to clean his filters about once a week and replace them about
once every 6 months. 3 filters are located inside the roof of the dustbin. These filters capture fine
particles and prevent them from escaping the dustbin.
1.
Push the button on Bob’s back and slide
the dustbin out.
4.
Replace the filters and slide the
dustbin back into Bob.
3.
Remove the filters and brush them with
Bob’s cleaning tool.
Cleaning Bob’s Filters
2.
Pull out the filter frame from the roof of
the dustbin.
Quick Tip:
Never fill the dustbin with
water or any other liquid.
Parts You’ll Need:
Cleaning Tool
56
55
