17
Installation and Configuration
2.3 Adapter Configuration
2.3.1 Loading a Single Board
The BOCALANcard Ethernet Adapter is a software-
configurable Ethernet adapter. No hardware jumpers are
necessary. In order to change parameters, run the
configuration utility, BENCFG.EXE, to set the
Programmable LED options.
BENCFG is installed when you select “Boca Ethernet
Utilities” from the installation program.
2.3.2 Loading Multiple Boards
To load more than one BOCALANcard Ethernet Adapter
in your machine, you must configure each one separately.
The network driver must be loaded again for each new
adapter board installed in the system. For example, to
load three boards in a NetWare server environment, the
following must be entered.
For first adapter board: LOAD BOCANW
For second adapter board: LOAD BOCANW
For third adapter board: LOAD BOCANW
<ENTER>
