CS6140, CS6140B Series Turning Machine Instructions
1-6
main switch of the distribution board. In addition, turn off the power switch supplying power from the plant to the
machine. Proceed with checks and maintenance only upon confirmation that the power has indeed been cut off.
If possible, the power supply should be locked in the off-position during checks and maintenance, or else signs
should be posted warning that the maintenance is being performed and no operation is permitted.
(5) Handle the electrical apparatus of machine with cautions and pay attention to their water proofness.
(6) An external power supply cable should be prepared by user, which must be larger in diameter than that specified
by the manual. Use over voltage protects. Cable in bottom of cabinet should be fixed with cable connector.
(7) Rated input voltage with fluctuation: 220V/380V/400V/415V/420V/440V/500V/575V/600V/660V
±
10%
(8) Rated input frequency: 50Hz/60Hz
±
1 Hz
(9) Phase: 3-phase AC, grounding
(10) Ambient temperature and humidity should be controlled as steady as possible so that there is no violent
change.
(11) Do not expose the machine as well as the electric unit to environment where corrosive gas or liquid exist such
as acid, alkali and salt.
(12) Do not expose the machine as well as the electric unit to dusty environment. Avoid dust accumulating on any
parts of machine.
(13) Do not expose the machine as well as the electric unit to magnetic or electrostatic environment.
Table of electric data
Rated voltage
Frequency
Phase
Total Current
IP grade
220V
50Hz/60Hz
3
63A
IP54
380V/400V
50Hz/60Hz
3
50A
IP54
415V
~
660V
50Hz/60Hz
3
40A
IP54
1.5 Safety precaution signs on machine
DANGER
Never touch the parts of machine attached with this sign
.
WARNING AND CAUTION
Proper precautions should be taken.
Summary of Contents for CS6140 Series
