background image

36

IX - WHAT TO DO IF...?    ...CHECK.

WHAT TO DO IF...?

… CHECK.

 

■ The clock displays

 .

 

■ The clock detects the “low battery

”, 

threshold, the pictogram representing an empty battery appears 
until the display disappears completely (batteries have run out). 
Replace the batteries. Resetting of the time and date is, automatic 
for radio synchronised or Irig-B / AFNOR clocks, manual for 
independent and receiver clocks. Dust on the battery contact 
terminals (+ and -) can disrupt the power supply to the clock. Clean 
these contact terminals with a soft dry cloth, if necessary.

.

 

■ The clock does not display the day 

of the week but a number

.

 

■ The clock is programmed in week number or day number display 

mode (reread the note on page

 27, § 4 ). 

 

■ The clock display does not go 

beyond 12 hrs

.

 

■ The clock is programmed in 12 hr instead of 24 hr mode (reread the 

note on page

 26, § 2 ). 

 

■ The time synchronisation of the 

clock is correct, but the time change 
has not taken place, the date or the 
time is not correct.

.

 

■ Check in time change mode that the clock is correctly programmed 

(reread the note on page

 28, § 5).

 

■ The radio pictogram flashes once 
every 5 seconds.

 

■ No radio reception, move the clock.

.

 

■ The display has disappeared, only 

the 2 dots are flashing.

 

■ You are in “Eco” mode between 11pm and 6am.

.

 

■ No display of time, only fixed colon 

mark

.

 

■ The DHF clock has received no time message for more than 24 

hours, check the DHF transmitter operation.

 

■ The display is completely blank.

 

■ The batteries are completely discharged, replace them.

 

■ Incorrect year on an Irig-B network.

 

■ Year must be manually entered on an Irig-B network.

 

■ no synchronisation after the 

installation.

.

 

■ Check that the type of signal sent by the master clock (min, ½ min, 
AFNOR or Irig-B) is in accordance with the type programmed in the 
clock.

 

■ Irig-B / AFNOR clocks not on time 
after a time setting on the master 
clock.

 

■ 1) wait the hour stroke on the slave clock so that it search to be 
synchronised,

 

■ 2) change manually  the time of the clock, so that it will have to do 
an immediate search of AFNOR or Irig-B synchronisation.

 

■ A receiver clock on a ½ minute 
network is 30s alter after the 
installation.

 

■ It is impossible for a slave clock to discern between two 1/2 minute 
impulses  which one is the master clock minute stroke, the reversal of 
the two wires is needed to correct the time.

 

■ Minute or ½ minute receiver with 

fixed display of time and  2 dots.

 

■ no impulse, check the master clock and the network.

 

■ AFNOR or Irig-B receiver with no 
display of time, the 2 dots fixed and the 
clock pictogram flashing.

no time coded message for more than 24 H. Check the master clock 
and the network.

Summary of Contents for Cristalys 14





































Reviews: