14
I - Initial Verification
Thank you for choosing a BODET IP Buttons Box. This product has been carefully designed for
your satisfaction based on ISO9001 quality requirements.
We recommend that you read this manual thoroughly before attempting to manipulate the product.
Keep this booklet during all the life of your product, so that you can refer to it each time it is
necessary.
Bodet cannot be held responsible for damages caused to the product due to use that does
not conform to the instructions described in this manual.
Any unauthorised modification of the product will invalidate the warranty.
1.1 Unpacking the Harmonys
Unpack with caution and check the contents of the packaging.
907760 (IP buttons box) must contain :
■
IP Buttons Box,
■
label sheet with name
■
sheet of blank label
■
This booklet,
907761 (4-buttons extension box) must contain :
■
4-buttons extension box,
■
label sheet with name
■
sheet of blank label
■
This booklet,
1.2 Cleaning
Use an antistatic product identical to that supplied. Never use alcohol, acetone or other solvents
which may damage product casing.
1.3 Pre-requisit
For the commisioning of the IP Buttons Box you must install «SIGMA». This software is available
on BODET web site www.bodet-time.com as a free download.
Note:
the Ethernet network connection to which the Bodet IP Buttons Box is connected must
be PoE, the power being supplied by a PoE switch or a PoE injector. Make sure that the power
capacity of your switch or injector is sufficient to power your product.
Bodet recommends the following brands:
■
PoE injectors: Zyxel, Tp link, D-Link, HP, Cisco, Axis, ITE Power Supply, PhiHong, Abus,
Globtek.
■
PoE switches: D-Link, HP, Planet, Zyxel, Cisco, NetGear, PhiHong.
