19
III.15 Matching of an HF remote control
For the HF remote control to function with the HMT Led clock, matching must be
carried out. This operation is carried out in the factory.
Matching is carried out on switching on of the clock for a limited period of 30
seconds, by pressing the [T] button for at least 1 second. The “88” display
appears.
Unmatching of a remote control is carried out in the same way as matching.
Note: each time the clock is switched on, an already matched remote control is inactive
for 30 seconds.
IV -
Settings menu
To define the HMT LED settings, use the two buttons on the front panel
of the single sided HMT LED or the HF radio control console. Access to the
programming keys by removing the right side of the master unit.
Caution : do not introduce metallic object in the clock to avoid short-circuit on the
electronic card.
S : “S” button
+ : “R” button
M : menu button
T : version / Test button
HF radio control panel
Programming buttons
Sel
+
