4
2. INTRODUCTION
This guide concerns the installation of one or more option cards.
The operation and use of these option cards is presented in the full Netsilon guide (available from the website www.
bodet-time.com).
2.1 Checking the package
Carefully unpack and check the contents of the package. These should include:
>
The option card(s),
>
Accessories for mounting the option card(s).
2.2
Saving the configuration
We recommend that you save the current Netsilon configuration before installing an option card.
To save a configuration via the Netsilon web server, follow these steps:
1) SYSTEM menu > Tools > Updating and backup.
2) Click
, and a file named “export.nets” will download to your PC.
2.3 Safety
Netsilon can be equipped with several power supply sources: if both AC and DC power supply options are
present, turning off the switch on the rear panel will not disconnect all power supply sources.
Ensure that all power supply sources have been removed from the Netsilon device before taking off the cover and
opening the product.
Only open the device in order to add or change option cards:
>
Never open the product with the power supply or supplies connected.
>
Ensure that all power supply sources are removed from the device before installing the option cards: unplug
the AC and/or DC power supplies connected to the equipment (according to model).
the switch is of functional type. It is not a power supply disconnect switch. Disconnect the power
supply and relay circuits before any intervention.
Fibre optic: risk to your eyes.
When inspecting a connector, make sure that the light sources are turned off. The light source in the
fibre optic cables may damage your eyes.
