9
IV - SAFETY INSTRUCTIONS
Installation and maintenance of this equipment must be carried out by qualified personnel only.
Electrical installation must comply with current standard CEI 364. (NF C15-100 in France for
example).
This is a class I product.
Do not apply the power before installation.
The mains supply for the clock must include a circuit breaker rapidly accessible. It must break
neutral and phase simultaneously.
This circuit breaker must be switched off during maintenance operations.
Use cable ties to attach the mains cable (see section “Installation).
Caution: use of an unqualified battery may present a risk of explosion. Waste battery should be
disposed so that they can be recycled.
LED lights can be hazardous to the eyes.
The LED lighting systems are less energy consuming than other types of lighting and have
lifetimes much longer.
Partly because of the limited nature of the surface emission, LEDs have luminances at least
1000 times higher than those of a traditional lighting source. The level of direct radiation from
such sources exceeds the level of visual discomfort.
Our clocks are designed so that there is no direct light, and thus no risk. However, it is
recommended to switch off the lighting system before opening the clock for maintenance.
Summary of Contents for Profil TGV 950
Page 3: ...3...