Instruction manual
20
BEFORE THE FIRST USE
Before starting operations in this section:
•
Find a place where there is power supply nearby.
•
Install the exhaust hose and adjust the window position well.
•
The supplied small white clips must be mounted on the window
kit.
•
Insert the power cord into a grounded AC220~240V/50Hz socket.
•
Press the power button to turn on the air-conditioner.
•
Set the temperature range: 16°C-31°C.
•
Check whether the exhaust hose has been mounted properly.
•
When using functions on cooling and dehumidifying, allow at least
3 minutes between powering off and powering on.
USE
Cooling operation
•
Press the “mode“ button till the “Cool“ icon appears.
•
Press the
or
button to select a desired room
temperature.
•
Allow around 5 minutes for the cooling to start.
•
Press the “fan speed” button to adjust airflow.
Dehumidifying operation
•
Press the “Mode“ button until the “dehumidify indicator lamp“
blinks.
•
The temperature will automatically be selected.
•
The fan speed will automatically be selected.
Timer operation
Timer ON setting
•
When the air-conditioner is OFF, press the “Timer“ button and
select a desired ON time and adjust using the temperature
buttons.
•
The ON time can be adjusted to anytime in 0-24 hours.
Timer OFF setting
•
When the air-conditioner ON, press “Timer“ button and select a
desired OFF time through the temperature buttons.
•
The OFF time can be adjusted to anytime in 0-24 hours.
Drainage
•
After a lengthy operation and before storage, you will need to
drain the water that has been collected. Please prepare a suitable
location or tray to collect the water and remove the rubber stop
