User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd
www.bodorcnc.com
28
From 2
nd
reflector to 3
rd
reflector, the
laser point on the acrylic should be
same when laser head is in the nearest
and farthest position.
Upper—adjust No.21 screw;
lower—adjust No.22,23 screw;
Left—adjust No.22 screw;
Right—adjust No.21,23 screw.
If on one point but not in the center of
the circle, please adjust as below:
Left/ right--No.11; up/down -- adjust the
height of laser tube
No.31 screw
No.33 screw
No.32 screw