User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd
www.bodorcnc.com
5
Brief Introduction of Laser Engraving Cutting Machine
I Safety Knowledge
1.1 Basic Information
Make sure that the operator is being trained before operating the machine.
Operator must be aside the machine during machine working. Never leave the
machine alone in case to cause unnecessary loss.
1.2 Optical Security
Our laser equipment adopts the fourth laser tube. Length of laser beam is 10.6μm. During
machine working, we recommend relevant people to wear authorized laser safety goggles.
Do not stare at the laser beam or anything beam reflected even when wearing laser safety
goggles.
1.3 Electricity Security
Before connecting electricity, please check carefully the requirements on the
equipment's name plate, such as power,working voltage and so on.
Without our permission, please don't dismantle electrical apparatus elements on the
equipment, especially do not touch laser power and laser tube during machine
working. Because the equipment has fatal voltage when working, and danger can still
exist after disconnecting electricity.
1 Harm
Various potentially dangerous substance can be eliminated through ventilation system
during plastic material cutting. If smog or smell is too heavy, gas mask is needed.
2 Other Harm
Out of security consideration, equipment modification is forbidden without the
permission from the Manufacturer.
