Sandwich T
oaster
11
clEAning
ThE houSing
AnD ToASTing
SurFAcES
Never use any harsh scrubbing cleaners, scrapers, metal
covered sponges, steel wool or soap steel wool sponges to
clean the toasting surfaces or the device housing.
Use only a moist rag to wipe the housing and toaster surfaces
clean. if tough residue should keep sticking to the toaster
surfaces, place some food grade oil on a paper towel and
remove the food with it.
Never immerse the housing, plug and cord into water –
the Sandwich toaster is an electrical device!
STorAgE
the cord should always be rolled up inside the cord compart-
ment (11).
Make sure your device always sits upright on its feet (7) while
it is being stored.
important:
Always unplug the device when it is not in use.
Always wait until the device has cooled down completely
before you clean it.
Before you start cleaning the appliance, make sure it is no
longer connected to mains.
Any other servicing should be performed by an authorized
service representative.
mAinTEnAncE
AnD cArE