10
EN
Instructions f
or use
AUTOMATIC
START
FUNCTION
To set the automatic start function, prepare the appliance for
the brewing process and then continue like this:
1.
Press the Stand by button (15) twice; the Program button
(12) rim will illuminate white.
2.
Press Program button (12); the LCD will display a CLOCK.
Set the current time by pressing the HOUR (13) and MIN (14).
(See figure 3.)
Note:
The time cycle is 24 hours; "AM" and "PM" will switch
once every 12 hours.
3.
After setting the current time press Program button again,
the LCD will display TIMER, then set the automatic start time
by pressing the HOUR (13) and MIN (14). (See figure 4.)
At 8:15PM the program button rim light will be extinguished,
and the Stand by button rim light will be illuminated white.
The appliance will start automatically.
Note:
If the coffee maker is left unattended for two hours
after brewing, it will shut off automatically.
Figure 3
Figure 4
CLEANING THE
MACHINE
When cleaning the Programmable Coffee Maker never use
any chemicals, steel wool or abrasive cleaners. Only clean
the body (1) with a damp cloth.
Never immerse the body in water. Remember that this is an
electrical appliance.
Note
: Always disconnect the Programmable Coffee Maker
from the mains prior to cleaning the appliance.
Clean the Programmable Coffee Maker after every use. The
following parts are dishwasher safe (only in the top compart-
ment of the dishwasher):
Press the Stand by button (15) twice to turn off the appliance.
The white rim light will go out.
Note:
You can take out the carafe, pour and serve coffee at
any time. The appliance will stop dripping automatically, but
return the carafe after latest 30 seconds.
