ECO-SERIES REAR BUMPER
2015-2016 FORD F150
Page 6 of 7
Passenger Side Installation Pictured
WARNING!
Do not crawl under bumper
unless the bumper is properly supported on
blocks or stands or the bumper may fall.
(2) 10mm Flat Washers
(2) 10mm Nylon Lock Nuts
(Fig 11) Use 10mm Plastic Retainer to hold Bolt
Plate in position. Note OE triple bolt plate in place
10mm Plastic
Retainer
(Fig 12) Use 10mm Plastic Retainer to hold Bolt
Plate in position. Note OE double bolt plate in place
10mm Plastic
Retainer
(2) 10mm Flat Washers
(2) 10mm Nylon Lock Nuts
(Fig 13) Attach Brackets to ends of frame with
factory hex nuts (triple bolt plate illustrated)
Reuse (3)
factory hex nuts
Reuse (2)
factory hex nuts
(Fig 14) Attach Brackets to ends of frame with
factory hex nuts (double bolt plate illustrated)
Rear
Rear
Rear
Rear