BODY BIKE Smart Troubleshooting Manual Download

Page: 5 / 6

TROUBLE SHOOTING

The belt does not catch hold of the flywheel

If the belt does not catch hold of the flywheel, it is time to tighten the belt, see figure 3.

TIGHTEN POLY-V BELT

Tighten belt equally on both sides.

Tighten to 125 kg/229Hz.

19 mm wrench

10 mm wrench

Belt tension

frequency meter

1. Loosen

2. Loosen

3. Tighten

Figure 3

Loosen

Tighten

6mm Allen

ADJUST VERTICAL HANDLES

Adjust only a quarter of a turn

at the time.

Handle

unlocked

Handle

unlocked

Figure 2b

Summary of Contents for Smart

Page 1: ...GENERAL INFO TROUBLE SHOOTING Version 1 1 ...

Page 3: ...tch Brite pad Pedals should be changed once a year or at least after 1500 hours At an annual service check vacuum clean inside the cycle and check that the ribs on the Poly V belt and pulley are clean Every second year the rubber feet should be replaced as the rubber hardens and becomes unable to absorb the impact GENERAL INFO ...

Page 5: ...belt see figure 3 TIGHTEN POLY V BELT Tighten belt equally on both sides Tighten to 125 kg 229Hz 19 mm wrench 10 mm wrench Belt tension frequency meter 1 Loosen 2 Loosen 3 Tighten Figure 3 Loosen Loosen Tighten Tighten 6mm Allen ADJUST VERTICAL HANDLES Adjust only a quarter of a turn at the time Handle unlocked Handle unlocked Figure 2b ...

Page 6: ...e covers please follow the instructions on figure 4 below Loosen Loosen 17 mm Wrench 3 mm Allen 8 mm Allen Hold top nut with wrench Turn handle counter clockwise until top nut comes off Carefully lift topcover Remove 10 screws Dismount pedalarm REMOVE LEFT SIDECOVER Figure 4 ...