background image

Customer service 1-888-707-1880 

3                MAURICE PINCOFFS CANADA INC.

©

2007 

 

SAFETY PRECAUTIONS 

 

Thank you for purchasing our product.  Even though we go to great efforts to ensure the quality 
of each product we produce, occasional errors and/or omissions do occur.  In any event should 
you find this product to have either a defective or a missing part please contact us for a 
replacement. 
 
This product has been designed for home use only.  Product liability and guarantee conditions  
will not be applicable to products being subjected to professional use or products being used in  
a gym centre. 
 
This exercise equipment was designed and built for optimum safety.  However, certain 
precautions apply whenever you operate a piece of exercise equipment.  Be sure to read the 
entire manual before assembly and operation of this machine.  Also, please note the following 
safety precautions: 
 
1. 

Read the OWNER

S OPERATING MANUAL and all accompanying literature and follow it 

carefully before using your elliptical. 

2. 

If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced while 
using this equipment, STOP the workout at once.  CONSULT A PHYSICIAN 
IMMEDIATELY. 

3. 

Inspect your exercise equipment prior to exercising to ensure that all nuts and bolts are 
fully tightened before each use. 

4.  

The elliptical must be regularly checked for signs of wear and damage. Any part found 
defective, the part must be replaced with new spare part from the manufacturer. 

5.   

Fitness equipment must always be installed on a flat surface, do not place the unit on a 
loose rug or uneven surface. It is recommended to use an equipment mat to prevent the 
unit from moving while it is being used, which could possibly scratch or damage the 
surface of your floor. 

6. 

No changes must be made which might compromise the safety of the equipment. 

7. 

It is recommended to have a minimum of 1

 safe clearance around the exercise equipment 

while in use. 

8. 

Keep children and pets away from this equipment at all times while exercising. 

9. 

Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward.   
This allows your heart rate to gradually increase and decrease and will help prevent you 
from straining muscles. 

10. 

Never hold your breath while exercising. Breathing should remain at a normal rate in 
conjunction with the level of exercise being performed  

11. 

Always wear suitable clothing and footwear while exercising. Do not wear loose fitting 
clothing that could become entangled with the moving parts of your elliptical. 

12. 

Care must be taken when lifting or moving the equipment, so as not to injure your back.  
Always use proper lifting techniques 

13. 

User weight should not exceed 265 lbs

.

 

 

 

WARNING:

   Before beginning any exercise program consult your physician.  This is especially 

important  for  individuals  over  the  age  of  35  or  persons  with  pre-existing  health 
problems.  Read all instructions before using any fitness equipment.  We assume 
no responsibility form personal injury or property damage sustained by or through 
the use of this product. 

 

PDF created with pdfFactory trial version 

www.pdffactory.com

Summary of Contents for 16117117


























Reviews: