BR2117 BR3151
Page 4
Part Listing
The following parts list describes all of the parts illustrated in the exploded diagram on the following page.
PLEASE NOTE
: most of these parts are already pre-assembled on your unit.
# Description
01 Main Frame
02 Center Post
03L Left Pedal Tube
03R Right Pedal Tube
04L Left Coupler Bar
04R Right Coupler Bar
05 Pulse Handle Bar
06L Left Pedal Connection Joint
06R Right Pedal Connection Joint
07L Left Handle Bar
07R Right Handle Bar
08 Front Stabilizer
09 Rear Stabilizer
10 Crank
11 Main Sensor Wire (Middle)
12 Main Sensor Wire (Lower)
13 Handle Pulse Wire
14 Carriage Bolt (M6x16 mm)
15 Carriage Bolt (M8x70 mm)
16 Bolt (M8x20 mm)
17 Bolt (M6x15 mm)
18L Left Pedal Hinge Bolt (1/2"x97 mm)
18R Right Pedal Hinge Bolt (1/2"x97 mm)
19 Bolt (M8x30 mm)
20 Hex Bolt (M8x45 mm)
21 Hex Bolt (M10x55 mm)
22 Hex Bolt (M8x40 mm)
23 Hex Bolt (M8x15 mm)
24 Clamp Cover
25 Screw (M5x10 mm)
26 Tension Control
27 Bolt Cap (S14)
28 Bolt Cap (S17)
29 Spring Washer (M8)
30 Spring Washer (1/2")
31 Washer (M8)
32 Wavy Washer (1/2")
33 Washer (M10)42 Nylon Nut (1/2")
# Description
34 Washer (M8, φ26 mm)
35 Washer (M8, φ16 mm)
36 Arc Washer (M8)
37 Wavy Washer (φ19 mm)
38 Nylon Nut (M8)
39 Nylon Nut (M10)
40 Left Nylon Nut with BLACK inner nylon ring
41 Right Nylon Nut with WHITE inner nylon ring
42 Nut (M8)
43 Spacer
44 Left Pedal
45 Right Pedal
46 Monitor
47 Shroud Cover
48 Bushing Left Shroud
49L Left Shroud
49R Right Shroud
50 Tension Control Cable
51 Shroud Wheel
52 Screw (ST4.2x20 mm)
53 Round Cap (φ31.8 mm)
54 Hand Pulse Sensor
55 Washer (M4)
56 Round End Cap (φ25 mm)
57 Round End Cap (φ28.6 mm)
58 Square End Cap (25x40 mm)
59 Bushing
60 End Cap for Rear Stabilizer
61 End Cap for Front Stabilizer
62 Foam Grip for Pulse Handle Bar
63 Foam Grip for Handle Bar
64 Bushing
65 Wire Plug
66 Tool 1
67 Tool 2
68 Tool 3
69 Tool 4
70 Tool 5
