BRB 3800
A s s e m b l y S t e p 6
Page 10
H a r d w a r e R e q u i r e d
Monitor Assembly
Remove the four
Screws (#18)
that are pre-assembled on the
back of the
Monitor (#50)
and set them aside. Connect the
Sensor Wire 7 (#47)
to the
Monitor (#50)
and also connect the
Sensor Wire 5 (#45)
to the
Monitor (#50)
. Carefully tuck in the
excess wiring from the
Monitor (#50)
in to the
Front Post (#09)
and align the holes on the
Monitor (#50)
and
Front Post (#09)
.
Secure them together using four
Screws (#18)
that were
previously removed.
The assembly process is complete. Please ensure all nuts, bolts
and knobs are securely tightened before using the cycle.
#18. Screw (M5x12 mm)
[4 Pieces]
Bolt
Assembly Instructions
