Body Charger GT8600RF, Owner'S Manual

MAINTENANCE AND TECHNICAL DATA

1. MAINTENANCE TIPS

2. ROUTINE MAINTENANCE SCHEDULE

For keep safety the Treadmill always at the high performance and working well, perform following tips are very important.

1.1 Clean the display console and all exterior surfaces parts routines to use soft cotton cloth with a soft cleaner are strongly 

      recommended. Do Not use the paper towels, ammonia or acid based cleaners.

1.2 Switch Off the power on the machines always if discontinue to use.

1.3 Vacuum the area directly surrounding and under the unit regularly.

1.4 Check the Emergency Stop System before using.

1.5 Lube under the Running Belt and on Deck regularly.

1.6 Check the centering of Running Belt, if the Running Belt was tracking beyond the position, see the instructions 1(A) and 

     1(B) to adjust back tracking center of the Running Belt.

1.7 Check the Tension of Belt will avoid Belt slipped, see instructions 2 to adjust back to proper tension of Belt.

2.1 Daily to clean:

      Overlay, Stop Switch, Emergency Stop Button, Safety Key, Hand Contact Sensors, Side Hand Rails, Motor Cover, 

      Side Step Rails, Running Belt and all other exterior parts.

2.2 Weekly to inspect:

      Stop Switch, Emergency Stop Button, Safety Key, Hand Contact Sensors, Machine Level, Centering Running Belt. 

      Tension of Belt lube under the Running Belt and on Deck.

2.3 Monthly to clean:

      Vacuum Clean Motor Electronic Compartment, Frame, End Caps, Motor Cover, Front Wheel and all other accessories.

2.4 Monthly to inspect and adjust:

      Leg Levelers

2.5 Quarterly to inspect:

      Hardware for Console, Side Step Rails

2.6 Semiannual to inspect:

      Hardware for Handlebar and Frame, Side Hand Rails, Motor Electronic Compartment, Drive Belt, Front and Rear Roller, 

      Deck and Running Belt.

22