Instructions for use
Easy TE
NS
11
9
8
10
Electrode Placement
KEY:
=first pair of electrodes
=second pair of electrodes.
N.B. Electrodes supplied with this unit are all the same colour - the
black and white squares show suggested electrode placement only.
Frequently Asked
Questions
Is it safe?
Yes, TENS is used widely for
pain relief and is recommended
by medical professionals.
Can I use it with other
medications?
Yes. TENS is drug free so
you can use it with any
other medication including
paracetamol.
What conditions can TENS
be used to treat?
TENS can be used to treat
numerous pain conditions.
If you are unsure about using
TENS please consult your
medical adviser or contact
Body Clock Health Care on
(+44) (0)20 8532 9595.
Can I use the Easy TENS for
labour?
This is not recommended.
For information on TENS for use
during labour, please visit
www.babycaretens.com or call
(+44) (0)845 230 9737.
Troubleshooting
Questions
Why does the pulse sensation
not appear to be as strong after
you have used the Easy T ENS
for a while?
Increase the intensity, you may
have become acclimatised to a
lower setting.
Why does the pulse sensation
feel strong but ineffective?
You may need to reposition the
electrode pads (don’t forget to
switch the Easy TENS off before
doing so).
Why does the sensation not
feel sufficiently strong even on
a high setting?
The batteries may need
replacing.
Useful Information
1. If electrodes become dry,
switch off the unit, disconnect
the electrodes, and apply a
small drop of water to them.
2. Ensure the unit is switched
off before removing wires and
pads. Do not pull the wires.
ALWAYS remove the jack plug
from the socket by holding
between forefinger and thumb.
Body Clock Health Care Ltd
108 George Lane, South Woodford
London, UK E18 1AD
Tel (+44) (0)20 8532 9595
Fax (+44) (0)20 8532 9551
www.bodyclock.co.uk
e-mail customercare@bodyclock.co.uk
June 2017 (2)
Your 5 Year Guarantee
Your Easy TENS machine is
guaranteed for a period of 5 years
against manufacturer’s defects.*
0120
*The guarantee does not include leads, electrodes or battery.
Easy TENS Technical Data
Display:
The LCD has a total of 13 display segments.
The array of Level Bars consists of 10 LCD Level
Bar. In addition, 2 individual LCD segments
respectively indicate the Modes (i.e. Burst
and Boost). The last LCD segment is used to
illuminate the low battery indicator.
Mode:
2 operation modes
Pulse
Pulse
Pattern
Frequency
Width
BURST
32Hz
150µs
2 bursts per
second
8 pulses per
burst
BOOST
70Hz
150µs
Constant pulse
Output Channel
ONE Channel
Automatic Power Off
5 minutes
Output Voltage
0 – 55V (zero-to-peak) across
a 500Ω load; adjustable in 10 steps
Output Intensity
110 mA (max.) into a 500Ω load
Output Waveform
Symmetrical Mono-phasic rectangular
Output Jacks
CE Touch-proof jacks
Battery
2 X1.5V AAA Battery (Type LR03)
Battery Low Detect
2.2V±0.1V
Tolerances
All output parameters are subjected to a
±10% tolerance unless other specified
