The assembly stage
1. Slide open the battery cover on the back of
the unit to expose the battery compartment.
2. Insert
the
batteries
according
to
the
diagram found in the battery compartment.
Replace the cover.
3. Select the leadwire that you wish to use for
your treatment:
a). The single leadwire can be used to
treat one pain area OR
b). The dual leadwire can be used to treat
two pain areas, or a large pain area such
as your back.
4. Insert the plug end of the leadwire into the
jack plug socket at the bottom of the Flexi
TENS.
5. Connect the electrodes to the pin ends of
the leadwire (see diagram right).
Insert a red
and black pin
(at the end of
the lead wire)
into each pair
of electrodes.
6
Flexi TENS Inst US 2009.qx7:Layout 1 10/6/09 11:09 Page 7
