BST800
Page 12
Computer Operation
MODE :
Press this button to select the display function of your
choice.
RESET :
Hold MODE button for 3 seconds to reset all value to
zero.
UP DOWN :
Press UP DOWN to set workout level
Key Function
*IMPORTANT NOTE :
Please remember that the functions in this computer are only meant to be tools to
monitor your workout progress; they are not meant to provide medical information
or be used for medical purposes. Please consult a physician before beginning any
workout program.
SCAN
: The monitor will then rotate displaying through the following functions: time,speed,distance,
calories and odometer. Each function will display for 5 seconds.
TIME
: Displays the total amount of time using the machine.
SPEED
: Displays current speed.
DISTANCE
: Displays the distance traveled.
CALORIES
: Displays the amount of calories burned.
ODOMETER
: Displays total accumulated distance.
PULSE
: Hold the pulse sensor 6-7seconds and read your heart rate per minute.
1.
If the display is faint or shows no figures ,please replace the batteries.
2.
The monitor will automatically shut off if there is no signal received after 4 minutes .
3. The monitor will auto-power on when exercise and/or motion input is detected.
4. The monitor will automatically start calculating when you start to exercise and will stop calculating when you stop
exercising for 4 minutes .
FUNCTIONS
NOTE
Operation Procedures
Specifications
AUTO SCAN
Every 6 seconds
TIME
00:00-99:59 min
SPEED
Max 999.9 mi./H
CALORIES
0.0-999.9 KCal
ODOMETER
0.0-9999 mi.
DISTANCE
0.0-999.9 mi.
BATTERY TYPE
2 pcs of AAA
PULSE RATE
40-240 bpm
OPERATING TEMP
32°F - 104°F
STORAGE TEMP
14°F - 140°F
FUNCTIONS
