Step 3:
A:
Fix the Swing bar (4L) on the long axle of the Handlebar post (2) with Hex bolt (21), Flat washer
(20). Please do not tighten them this time.
B:
Attach the connecting joint together with Pedal Support (3L/R) to the Crank (49) using Inner hex pan
head screw (15L), flat washer (20) and Waving washer (61). Please do not tighten them this time.
C:
Connect Swing bar (4L/R) with Pedal Support (3L/R) using Hex bolt (26), Flat washer (47) and
Nylon nut (48). Tighten the Hex bolt (21) (26) and Inner hex pan head screw (15L). Finally Cover
the Nut caps (35) (45) (29).
D:
Fix the Pedal support (3R) and Swing bar (4R) to Crank (49) and Handlebar post (2) in the same
way.
E:
Fix the Pedal (9L/R) to the Pedal support (3L/R) with Hex bolt (23), Flat washer (24) and Nylon nut
(25).
