1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until the end of step 3.
*Some parts are pre-installed.
A.
Attach Mainframe Assembly (A) to Back Foot Tube (B) and Back Plate (10) using:
Two 25 (M10 x 70 hex head bolt)
Four 35 (
f
10 washer)
Two 37 (M10 nylon lock nut)
B.
Attach two Foot Caps (18) to Back Foot Assembly (B) as shown.
C.
Attach Front Frame Assembly (C) to Mainframe Assembly (A) using Sleeve Tube (15) through the
Bearing’s (17) hole using:
Two 33 (M6 x 10 hex head socket set screw)
Two 34 (M8 x 30 button head cap screw)
Two 36 (Washer
f
8)
D.
Put one End Cap (19) and two End Caps (20) onto Front Frame Assembly (C).
E.
Screw Bumper (24) and nut (52) into Mainframe Assembly (A).
1
Summary of Contents for GFLP
