background image

25

THE BODYCRAFT 400M WARRANTY

BODYCRAFT warrants its products to be free of defects in material and workmanship for the 

time stated below to the original purchaser.

Residential Warranty: Lifetime* Frame and Drive Motor, 5 years Parts & Electronics and 

2 years Labor.

This warranty is valid only in accordance with the following conditions:

•  The warranty begins on the original date of purchase at retail and ends when the original 

owner disposes of it, either through sale, gift, or otherwise.

•  This warranty is available only for purchases made within the USA and Canada, and cur

-

rently residing in the USA or Canada.**

•  In order for the warranty to be valid for the terms listed below, the product must be regis

-

tered with BODYCRAFT within 30 days of purchase.

•  The warranty is not transferable and does not cover normal maintenance.

•  This warranty applies to Residential use only and is void when used in a Commercial 

environment.

•  This warranty does not cover damage or equipment failure caused by electrical wiring not 

in compliance with electrical codes or owner’s manual specifications, or failure to provide 

reasonable and necessary maintenance as outlined in the owner’s manual.

•  This warranty does not cover damage resulting from shipping, accident, misuse, water, 

tampering, unreasonable use, unauthorized or improper repairs and alterations.  

•  This warranty does not cover normal wear and tear.  

•  BODYCRAFT cannot guarantee that the heart rate system on its products will work for all 

users. Heart rate measurement accuracy varies based on a number of factors, including 

the user’s physical condition, the heart rate measurement method is used, external inter

-

ference, and other factors that may influence heart rate acquisition.

•  If the item exhibits such a defect, BODYCRAFT will, at its option, repair or replace it with

-

out cost for parts. Shipping and handling charges may apply. (BODYCRAFT may request 

a return of the part(s) or photographic evidence of the damaged part(s) prior to replace

-

ment at the owner’s expense).

•  Proof of purchase must be supplied to validate warranty and the product must have been 

registered  with  BODYCRAFT  via  the  included  warranty  card  or  online  at  www.BODY

-

CRAFT.com.

•  This warranty is in lieu of all warranties, expressed or implied, and/or all other obligations 

or liabilities on our part and we neither assume nor authorize any person to assume for 

us any other obligation or liability in connection with the sale of the BODYCRAFT 400M. 

Under no circumstances shall we be liable by virtue of this warranty or otherwise for dam

-

age to any person or property whatsoever for any special, indirect, incidental, secondary 

or consequential damage of any nature whatsoever arising out of the use or inability to 

use the BODYCRAFT 400M.

* Lifetime is defined as the period the original owner owns it, or 5 years after the product has 

been discontinued. 

** If you do not reside within the USA or Canada, please contact your local BODYCRAFT dis-

tributor for details specific to you.

Summary of Contents for Blu series 800m
































Reviews: