Troubleshooting
11
Computer not working correctly
Check all connections to the computer at the top and base of the Mast. It is a good
idea to unplug and reconnect the connectors during your inspection to ensure all of the
computer cables are connected securely.
The elliptical trainer wobbles when in use
If you have recently relocated your machine or if the jam nuts on the levelers have
worked loose, you may need to re-adjust the levelers. Follow the procedure for
leveling the machine in this manual.
Squeaking noise when in use
Inspect all frame bolts that may have worked loose on the elliptical trainer. Re-tighten
any loose bolts.
No, inconsistent, or erratic heart rate reading
Your Elliptical Trainer is equipped with dual contact handgrip pulse and a wireless 5
kHz heart rate receiver. You should first try to to determine which is causing the
problem. If you are seeing a reading without holding onto the contact sensors, it is
likely the wireless receiver that is the problem.
Wireless:
Unusually high, low or random numbers in the heart rate display indicate a problem.
Try moistening the electrodes on the heart rate belt.
The batteries in the belt may be failing. Replace the batteries or the Heart Rate belt.
The problem may be caused by interference. Televisions, microwaves, wireless
alarms and electric fences are just a few items that can cause interference. You can
try relocating the machine to a different part of the room. If you continue to have
problems, please contact Bodycraft for additional troubleshooting of wireless heart rate
issues.
Contact Heart Rate:
Always hold on to the handlebar grip sensors with two hands instead of just one.
Try to maintain moderate pressure while holding onto the hand pulse sensors.
Make sure that the wire connections for the hand pulse sensors are secure.
Compare the stationary grip pulse to the grip pulse on the dual action arms. If you get
a accurate readout out with the stationary grips, the problem is that your hands are
losing grip during the workout.
Summary of Contents for ECT400g
Page 1: ...ECT400g Elliptical Cross Trainer ...
Page 27: ...Memo ...
