1
3
2
52
52
56
9
53
53
54
4
5
6
8
57
58
10
11
7
52
63
63
20
77
68
68
68
68
75
75
59
59
90
107
107
107
107
113
111
84
98 107
84
111
111
106
105
106
90
90
107
107
107
113
111
111
111
111
84
84
108
83
111
STEP 1 Main Frame Assembly
Do Not Tighten Any Bolt, Until Instructed.
1.Attach Right Stabilizer (2) and Left Stabilizer (3) to Base Frame (1) using two 1/2” X 4” Hex
bolts, four 1/2” Washers (106) and two 1/2” Nylon Nuts (111).
Attach three 45 x 75 End Caps (52) and one 45 x 75 Rect. End Plug (56) to Base Frame (1).
2.Attach Main Central Frame (4) to bolts on Base Frame (1) using three 1/2” Washers (106) and
three 1/2" Nylon Nuts (111). Slide Top Central Frame (5) onto Main Central Frame (4) and
attach using two 3/8” Washers and two all-threaded 3/8” X 1” Hex Bolts (97). Attach Left
Stabilizer (3) to Main Central Frame (4& 5) using two 1/2” X 4” Hex Bolts, four 1/2” Washers
(106) and two 1/2” Nylon Nuts (111). Attach Lat Bar Holder (10) to Top Central Frame (5), using
two 5/16” X 5/8” Hex bolts. Attach a 75 Sq. End Cap (57) to front of Top Central Frame. Place
the 50SQ Spacer (54) onto receptor on Main Central Frame as shown. Insert Adjustable Knee
Holder (20) into receptor on Main Cental Frame (4). Attach two 45 Sq. End Plugs (59) to top
and bottom of Knee Holder (20).
3.Insert Chromed Rear Upright (6) into
Base Frame (1) as shown. Attach
using two 3/8” X 3” Hex Bolts (90),
four 3/8” Washers (107), and two 3/8”
Nylon Nuts (113). Slide Spring Coil (9)
and Weight Holder (7) onto Chromed
Rear Upright (6). The cable bracket on
Weight Holder should be facing
forword. Slide a Rubber Doughnut (63)
and Spring Clip (75) onto each side of
Weight Holder (7). Cap Rear Upright
(6) with a 50 Sq. End Plug (58).
4.Attach Top Frame (8) to Top Central
Frame (5) using two 1/2” X 2-3/4” Hex
Bolts, three 1/2" Washers (106) and
one 1/2” Nylon Nut (111). Attach Top
Frame (8) to Chromed Rear Upright
(6), using two 3/8” X 3” Hex Bolts, four
3/8” Washers (107) and two 3/8” Nylon
Nuts (113).
-4-
