STEP 5
Orient the Handlebar (3) as shown. Attach the
Handlebar to the Handlebar Upright (4) with three
M8 x 16mm Upright Screws (59) and three M8 Curved
Washers (60).
ASSEMBLY INSTRUCTIONS
BDEX1996.0
STEP 6
The Console (1) requires two 1.5 V “AA” batteries (not
included). Remove the battery cover from the
Console, and insert two batteries into the battery com-
partment.
Make sure that the batteries are oriented
as shown by the diagram inside the battery com-
partment.
Then, reattach the battery cover.
While a second person holds the Console (1) near the
Handlebar Upright (4), connect the console wire to the
Handlebar Upright Wire (24). Insert the excess wire
into the Handlebar Upright.
Next, attach the Console (1) to the Handlebar Upright
(4) with four M4 x 8mm Screws (69).
Be careful to
avoid pinching the wires.
Then, plug the Pulse Wire (5) into the back of the
Console (1).
PLEASE DO NOT RETURN TO STORE; CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT
1-877-872-6970
10
3
4
59
59
60
60
5
1
4
Console
Wire
24
69
Battery
Compartment
