Step 1
Connect the Left and Right Base Frame (#1L & #1 R) with the Mid-
Stabilizer (#2), Secure each end with two M8 Hexagon Pan Head
Screws (#24), four Arc Washers (#35) and two M8 Lock Nuts (#33).
NOTE: Tighten the Nuts and Bolts at this time.
Right Angle
Left Angle
Step 2
Attach the Left Lower Upright Post (#4)
onto the Left Base Frame (#1L), secure it
with two M10 Carriage Bolts
（
#21
）
, two
Arc Washers (#28) and two M10 Lock
Nuts (#32).
NOTE: Do Not tighten the nuts and bolts
yet.
Right Angle
Left Angle
Attach the Left Diagonal Support (#3) to
the Left Base Frame (#1L) and the Left
Lower Upright Post (#4), secure it to the
Left Base Frame with two M8 Carriage
Bolts(#22), two Arc Washers (#29) and
two M8 Lock Nuts(#33). Secure it to the
Left Lower Upright Post(#4) with two M8
Hexagon Pan Head Screws(#24), four
Arc Washers (#29) and two M8 Lock
Nuts(#33).
Repeat to install the Right side.
NOTE: Do Not Tighten all the Nuts and Bolts at this time.
5
ASSEMBLY INSTRUCTIONS
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
