6
Knee Pad Assembly
and Height
Adjustment
1. Release the quick release
clamp.
2. Remove the pin on the knee
pad assemble bar.
3. Insert the knee pad column
into the column on the frame,
then adjust the knee pad
column to the proper height.
4. Insert the pin into the hole to
lock the height in place.
5. Tighten the quick release
clamp under the knee pad.
Handlebar
Assembly and
Height Adjustment
1. Release the quick release
clamp.
2. Loosen and remove the star
screw (knob) attached to the
steering column, and adjust
the height of the steering
column.
3. Insert the star screw (knob)
into the hole to cross the two
columns, and tighten the
knob into the adjacent screw
on the steering column.
4. Tighten the quick release
clamp to secure.
