7
Connecting the Device
(continued)
Battery Information
Changing the Battery
6. Adjust the Amplitude Control knobs: Locate the Amplitude Control knobs at the top
of the unit. Slowly turn the Amplitude Control knob for Channel 1 clockwise until you
reach the intensity recommended by your physician or licensed practitioner.
Always start with the lowest intensity and increase slowly.
Repeat the same process
for Channel 2, if appropriate.
If the stimulation levels are uncomfortable or become uncomfortable, reduce the
stimulation amplitude to a comfortable level. If problems persist, stop treatment and
contact your physician or licensed practitioner.
A 9-volt disposable battery is provided with the unit. When the indicator light is dimming,
the battery has become too weak to power the unit and will need to be changed. At this
point, the unit will shut off until a new battery is inserted.
When the indicator light is dimming, the battery should be replaced with a fresh 9-volt battery.
1. Remove the slide cover by pressing the top and sliding down until it is completely
removed from the unit. This will reveal the battery compartment.
2. Remove the old battery from the device.
3. Place a new battery in the compartment. Note the proper polarity alignment
indicated on the battery and the compartment.
4. Make sure to safely dispose of the old battery.
