10
Troubleshooting
4. If the “hr” symbol is displayed when the unit is turned on, immediately turn the unit
off. You may turn the unit back on once more and use normally if the “hr” symbol is
not displayed. Do not hold down any keys when turning on the unit. Do not use the
unit if the “hr” symbol is displayed. Contact your physician or licensed practitioner
for more information.
5. If the “lock” symbol is displayed when the unit is turned on, this indicates that the
unit has been locked by your physician or licensed practitioner. It can still be used,
but treatment parameters cannot be changed. Please contact your physician or
licensed practitioner to unlock the unit or change treatment parameters.
If any other problems occur, please consult or return the device to BodyMed. Do not try
to repair a defective device.
Technical Specifications
Channel:
Dual, isolated between channels
Pulse Intensity:
Adjustable 0-80mA peak into 500
Ω
load each channel, constant
current
Carrier Frequency
4000 Hz fixed (CH1)
Modulating Frequency
4004-4160 Hz Adjustable (CH2)
IF Frequency Mode
Constant Mode: 4-160 bps, Adjustable
Auto Sweep: 80 -145 bps, 4 - 45 bps, 4 - Set bps Frequency Shift: 1/1
abruptly shift, 6/6 abruptly shift, 6/6 ramped, 10/10 abruptly shift,
10/10 ramped
Sweep Time
15 seconds
Frequency Shift Percent
Frequency shifts from 30% below set frequency to 60% above and
returns to 30% below set
Output Configuration:
Quad polar (4 electrodes)
Wave Form:
Symmetrical balanced Sine wave
Interference Pulse Freq.:
4 - 160 bps, adjustable 4 bps/step
Pulse Duration:
125 μs maximum
Patient Compliance Meter:
Shows the treatment times in hours
Patient Lock System:
Prevents the user from changing any fixed parameters set by the
physician or licensed practitioner
Timer:
15-, 30-minute
LCD:
Shows modes, bps rate, abrupt/ramp, timer and channels
Max. Charge per Pulse:
15 micro-coulombs maximum
Power Source:
9-volt AC adaptor, 500 mA or 9-volt battery (not recommended)
Dimension:
108 x 61.5 x 25 mm
Weight:
100 grams (without battery)
Tolerance:
+/-10%
