11
Function Modes
Output Parameters: There are nine modes: five modes with Frequency Shift, three modes
with Auto Sweep, and one mode that is fully adjustable.
Constant Mode: Maintains set pulse frequency. (SET: bps can be adjusted)
Auto Sweep: Modulates frequency between the range that is selected. For example, select
80 - 145 bps Auto Sweep model. The modulation range of pulse frequency is from 80 to 145
bps. The Sweep Time is 15 seconds and then repeats.
There are three modes of Auto Sweep:
1.
80 – 145 bps
2.
4 – 45 bps
3.
4 – SET bps
Frequency Shift: There are five modes:
1. 1/1 abruptly shift: The pulse frequency varies from –30% to +60% of the set pulse
frequency. One second at the lower frequency, and one second at the higher
frequency. The transition is abrupt (square wave function).
2. 6/6 abruptly shift: The pulse frequency varies from –30% to +60% of the set pulse
frequency. Six seconds at the lower frequency, and six seconds at the higher
frequency. The transition is abrupt (square wave function).
3. 6/6 ramped shift: The pulse frequency sweeps from –30% to +60% of the set pulse
frequency. Six seconds from the lower frequency modulate to the high frequency,
and six seconds from the higher frequency modulate to the lower frequency. The
transition is ramping (triangular wave function).
4. 10/10 abruptly shift: The pulse frequency varies from –30% to +60% of the set
pulse frequency. Ten seconds at the lower frequency, and ten seconds at the higher
frequency. The transition is abrupt (square wave function).
5. 10/10 ramped shift: The pulse frequency sweeps from –30% to +60% of the pulse
frequency. Ten seconds from the lower frequency modulate to the high frequency,
and ten seconds from the higher frequency modulate to the lower frequency. The
transition is ramping (triangular wave function).
Technical Specifications
(continued)
