7
Rate
The Rate key regulates the number of pulses per second for both channels. This key
selects the pulse frequency of the therapy current. By pressing the
, you can increase
the frequency in 4 bps/step. By pressing the
, you can decrease the frequency in 4 bps/
step.
Time
Treatment time can be set with Time key. There are two programs of fixed duration for 15
and 30 minutes. Press the Time key until the desired program is engaged. To reset timer,
turn both channels off. When you are ready to begin another treatment cycle, turn the unit
on as normal. The timer will be reset to its current setting.
Device Controls
(continued)
Your physician or licensed practitioner should decide which type of electrode is best for
your condition. Follow application procedures outlined in electrode packaging to maintain
stimulation and prevent skin irritation. The packaging will provide instructions for care,
maintenance and proper storage of the electrodes.
Be sure to use the electrodes provided by BodyMed
®
and/or similar FDA legally marketed
electrodes that are the same size, or larger than, the electrodes that are provided with this
ZZAIF400 EMS unit.
Electrode Selection and Care
Attaching the Lead Wires
Insert the lead wires into the output receptacle located on top of the unit by holding the
insulated portion of the connector and pushing the plug end of the wire into one of the
jacks. After connecting the wires to the unit, attach each wire to an electrode. Lead wires
provided with the device are compliant with mandatory compliance standards as set forth
by the FDA. Note: Use caution when you plug and unplug the wires. Pulling on the lead
wire instead of the insulated connector may cause wire breakage.
Caution: Never insert the plug of the lead wire into an AC power supply socket.
