7
CHAPTER 6 : TECHNICAL SPECIFICATIONS
The technical specification details of ZZAN602 are as follows.
MECHANISM
TECHNICAL DESCRIPTION
1
Channel
Dual, isolated between channels
2
Pulse Amplitude
Adjustable, 0-80 mA
peak into 500 ohm load each channel
3
Pulse Rate
Adjustable, from 2 to 150 Hz
4
Pulse Width
Adjustable, from 30 to 260 microseconds
5
Modulation Mode
Pulse rate is automatically varied in a
cyclic pattern over an interval of nomi-
nally 10 Seconds.(in max 150Hz) Pulse
rate decreases linearly over a period of
4 seconds from the control setting value
to a value which is 40%less. The lower
pulse rate will continue for 1 second.
Then increase linearly over a 4 seconds
period to its original value. The original
pulse rate will continue for 1 second. The
cycle is then repeated.
6
Burst Mode
Bursts occur twice very second. Pulse
width(adjustable), frequency = 100 Hz
7
Wave Form
Asymmetrical Bi-Phasic Square Pulse
8
Timer
15, 30 minutes or Continue
9
Voltage
0 to 40 V (Load : 500 ohm)
10
Max. Charge per pulse
20 micro-coulombs
11
Power Supply
Approximately 50 hours at nominal set-
tings.
12
Battery Life
Approximately 50 hours at nominal set-
tings.
13
Size
95(H) x 65(W) x 23.5(T) mm
14
Weight
115 grams(battery included)
