background image

SAFETY CONSIDERATIONS

1.    When adjusting the height of the handlebars, make sure the 

knob and pin lock tightly for a secure hold.

2.   Be sure to hold onto the handlebar grips using two hands.
3.   To slow down or stop the knee walker, squeeze the two hand 

brakes to engage the back-wheel brakes. Be mindful of 

distances and speed when attempting to slow down or stop.

4.  Keep the walker balanced when in use. 
5.   Unless adjusting the height, do not pull up on the knee pad. Be 

careful not to damage the connecting parts. 

6.   Do not lean forward while positioned on the knee pad as doing 

so may cause the knee walker to flip over. 

7.  Ensure all connecting parts are not damaged before use. 
8.  Do not operate near stairs.
9.   Do not operate when taking medication that may cause 

dizziness or unbalanced walking. 

10.   This device is intended for use while a person is in place on the 

walker. Do not use it to pull yourself up from a seated position.

11.   Please be cautious when moving from a carpeted area to hard 

surface floors or any rough surfaces.

12.  Do not use if any pins are missing.
13.   For best results, this device should not be used over the rated 

weight limit.  

MAINTENANCE AND STORAGE

1.  Be sure to install the knee walker components correctly 

before use. Do not damage the components during 

installation. 

2. Clean using a normal, neutral detergent. 

3. Store in a dry, ventilated place.

11

Summary of Contents for ZZRWAL03E













Reviews: