- 3 -
2.
IMPORTANT SAFETY INSTRUCTIONS
When using this product, basic precautions should always be followed, including the following:
Please read the instruction carefully before starting to use this product.
Danger
– To reduce the risk of electric shock
：
1.
Always unplug this product from the electrical outlet immediately after using and before
cleaning the treadmill.
Warning
– To reduce the risk of burns, fire, electric shock, or physical injury
：
1.
The product should never be left unattended while plugged in.
Unplug the product from the outlet when not in use or before putting on or taking off the
clothes and other belongings.
2.
To avoid any danger, close supervision is necessary when this production is used by children,
invalids or disabled persons. So it is when the machine is working with such persons around.
3.
Be sure to use the product only for its intended use as described in this manual. Do not use any
attachment not recommended by the manufacturer in order to avoid any danger or accidents
。
4.
Never operate the product if it has a damaged cord or plug, if it is not working properly, if it
has been damaged, or dropped into water. Please return the product to the service center of
seller for examination and repair.
5.
Do not carry this product by the supply cord or use the cord as a handle
。
6.
Keep the cord away from hot surfaces or ground
。
7.
Never operate the product with the air vents blocked. Keep the air vents free of lint, hair, etc
。
8.
Never drop or insert any objects into any vent of the treadmill
。
9.
Do not use or operate outdoors
。
10.
Do not operate where aerosol (spray) products are being used or where oxygen is thin
。
11.
Before turning the product power off, turn all controls to the off position then remove the plug
from the outlet
。
12.
Connect the product to a properly grounded outlet only
。
13.
If the power cord is damaged, be sure to ask the manufacturer for replacement to avoid
accidents .The seller and correlative qualified professionals are as well as eligible
。
Summary of Contents for JFIRE
Page 15: ...14 Refer to the pre set parameters of PROGRAM...
Page 16: ...15...
