- 11 -
** Range of speed
：
1.0~16 km/hr
，
Step is 0.1 km/hr
Range of inclination
：
0~15 Level
，
Step is 1 Level
4.
You can also enter other functions by pressing
under the Start / Ready state.
5.
Press
to start fan at once. Press this key again to stop fan.
6.
Except the buttons on the Computer, the switches on the Handrails can also be used to
adjust the speed and angle, the left ones are used to adjust the inclination, the right ones
are used to adjust the speed.
** If the safety key is not placed in the recess of the console, all windows will display “
-----
＂
.That
means the treadmill has not entered the start/ready state.
MODE Function Key
7.
Press
under Start/Ready state, the
MANUAL
LED light flashes, at this time you
have entered the Function Selection Mode, press “
or
＂
to switch
among
MANUAL,
P1~P5 and HRC LED.
8.
MANUAL
Functions
：
8.1.
When
MANUAL
indicator flashes, press
，
the
MANUAL
indicator stops flashing
and keeps on lighting, the
TIME
LED light flashes and at this time you can adjust the time.
8.2.
If press
，
the motor will start at the speed of
1.0 km/hr
，
at this time you can
press
“
or
＂
to adjust the speed and inclination of the treadmill.
9.
P1~P5
Program Control Function
(each
PROGRAM
has 15 stages)
9.1.
When the
MANUAL
LED flashes, press
“
or
＂
until the desired
LED light of
P1~P5
flashes, press
to confirm, after you enter the program
control function, the corresponding light will keep on lighting.
9.2.
At this moment, the
CALORIES
window will display the exercise intensity
level
(
L1~L5
),
you can press
“
or
＂
to select the desired level,
after you have selected the level press
to confirm.
