background image

 

 

- 8 - 

6.

 

CAUTION 

 

Note 1: The Cylinder is made of high pressure, 

so be extra careful not to make an 
impact on it with other object that may 
cause deformation. 

Note 2: The cylinder may be damaged and not 

be smooth in use when it is hit. The 

damage may also result in the fall of 

the treadmill when folding.

 

 

 

This treadmill has the foldable mechanism for 
storage. Stop all the movements (including stop the 
running belt and take off the power cord) before 
storage, then fold the main frame as the direction 
shown in the right picture. Be sure the fixing plate 
inserts the tube of base frame. On the contrary, if 
you want to use treadmill, step on the fixing plate 
as the direction shown in the right drawing. When 
it disjoins from tube of base frame, pull down the 
main frame as shown at the right drawing. Please 
stand beside the treadmill and the main frame will 
be slowly landing to the ground automatically. 
    ( Ps.1. To prevent from danger, be careful if the 

kids are around. If you want to move the 
treadmill, fold the treadmill at first, hold the 
rear adjust cap with your hands, then lean the 
treadmill and do not move the treadmill until 
the roller can be moved smoothly.) 

  (Ps.2. Do not move the treadmill on uneven 
ground.) 
    (Ps.3. To avoid the injury, do not stand under the 
frame when the frame is descending.) 

 

 

Summary of Contents for JINTREPID


















Reviews: