2015/3/9V1.1+V1.1
28
1. It is an automatic program of LEVEL change and the pre-programmed default value.
The LEVEL is 20. Scroll the contour plot to make changes of each phase in details.
2. After the end of the program, you may manually adjust the LEVEL. A change is
available for each stage. When the target value is
“time”, it has
12 stages of change. Each stage = time value divided by 12; When the target value is
set as
“distance” or “calories”, per minute has one change. 12 minutes later, it will
return back to the figure of the first phase for circulation.
Hill
1. It is an automatic program of LEVEL change and the pre-programmed default value.
The LEVEL is in the mode of foothill. Scroll the contour plot to make changes of each
phase in details.
2. After the end of the program, you may manually adjust the LEVEL. A change is
available for each stage. When the target value is
“time”, it has
12 stages of change. Each stage = time value divided by 12; When the target value is
set as
“distance” or “calories”, per minute has one change. 12 minutes later, it will
return back to the figure of the first phase for circulation.
Interval
1. It is an automatic program of LEVEL change and the pre-programmed default value.
The LEVEL is in the mode of height interval. Scroll the contour plot to make changes
of each phase in details.
2. After the end of the program, you may manually adjust the LEVEL. A change is
available for each stage. When the target value is
“time”, it has
12 stages of change. Each stage = time value divided by 12; When the target value is
set as
“distance” or “calories”, per minute has one change. 12 minutes later, it will
return back to the figure of the first phase for circulation.
Random
1. It is an automatic program of
LEVEL “random” change. Press “?” to change the
pre-programmed resistance curve which will form more than one hundred curves.
You may scroll the contour plot to make changes of each phase in details.
2. After the end of the program, you may manually adjust the LEVEL. A change is
available for each stage. When the target value is
“time”, it has
12 stages of change. Each stage = time value divided by 12; When the target value is
set as
“distance” or “calories”, per minute has one change. 12 minutes later, it will
return back to the figure of the first phase for circulation.
Custom
While setting the above seven programs, adjust any level contour of any program by
