2015/3/9V1.1+V1.1
36
MCU Version
：
the version of the I/O firmware of the system
Kernel Version
：
version of the core program of the system
BG Service
：
null
：
means no backend service
ready
：
means backend service is ready
not ready
：
means backend service is available but abnormal
Honix ID
：
production identity code of the board of the main machine.
8.3. Time zone setting
Choose your region, the system will automatically load and sync as per local internet time
zone based on GMT, or adjust the date and time.
This time is system time displayed on the desktop of standby mode and also
applied to certain specific exercise management course.
8.4. Language
Choose language, the system will be set as default language.
※
Once language is set, when press Back to exit, the system will reboot automatically to
make sure the language setting is smoothly.
8.5. Setting Metric or Imperial system Units
Choose
“Metric” for metric system, choose “English” for imperial system. System will auto
sync with the choose system for all setting.
8.6. Machine information
Machine type
：
Set the ratio of different bike type will affect the watt value. For example,
upright bike, please choose BikeB. Recumbent, please choose BikeR. Elliptical, please
choose BikeE. If stride can be adjusted in elliptical, please choose BikeES.
Total Time: Accumulated work out time and distance can be reviewed.
Total Distance: Accumulated work out time and distance can be reviewed.
Maintenance Distance: Maintenance reminder switch can be set (preset is off) The set data
for the maintenance reminder will be used as the warning target by the system, once it is
reached,
“This machine is due for scheduled service” will show up every time the machine
is started. Please add silicon lubrication and come back to this page to zero the data.
Maintenance Time: Same as above.
